The Flashlight - Maglite MAGCHARGER RE1019 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The Flashlight

Section 1
1
2
1. Face Cap
ssembly (lens and
reflector)
The Face Cap ssembly is removable for
replacement of lamp only. The reflector assembly is
factory sealed and should not be removed from face
cap (Fig. 1). Lens: The high-efficiency tempered glass
lens on the Mag Charger® Rechargeable Flashlight
System is an integral part of the optical system. It is
precision cut, ground and tempered for its application.
Besides its high transmittance of light, the lens has
greater resistance to temperature, acids and solvents.
Reflector: Highly-polished, scientifically-designed,
metallic reflector withstands extreme temperatures.
Note: The heat tempered lens can suffer breakage if misused. 1. DO NOT
USE S N IMP CT TOOL! 2. Do not operate flashlight with the face cap off
and the lamp on and exposed. Personal injury or damage to heat sensitive
materials may result, e.g. plastics, rubber, cloth fabrics, etc.
2. Head
The head is not removable; any attempt to
do so will only damage its function. The head can be
lowered to the Charging Ring Module for replacement of
lamp (see page 13). Focusing Beam: Quick focusing
"continuous cam-action" spot-to-flood beam. Operates
with a simple quarter turn of the flashlight head
assembly. (Fig. 2)
3
4
Fig. 1
5
3. Switch
Sealed, flush-with-the-barrel electronic switch provides
access to five different functions – Full Power, PowerSave (25%),
Strobe (5x/sec), SOS (International Morse Code distress signal), and
Momentary On/Off.
4. Serial Number
registration and identification.
5. Durable Finish
Hard Type III anodized aircraft aluminum inside and out. With minimum
care, your flashlight will maintain its rich black appearance indefinitely.
(Direct constant exposure to sunlight will fade any color.) The barrel
features the ultimate in diamond knurl design.
6. Spare Lamp in Tail Cap
halogen bulb resides in the tail cap should your lamp ever need
replacing.
Fig. 2
Permanently engraved serial number for
The barrel, head assembly and tail cap are of
For your convenience a spare
6
5

Publicité

Table des Matières
loading

Table des Matières