Storage Conditions; Electromagnetic Fields (Emf); Technical Information - Philips AVENT SCF397 Mode D'emploi

English
22

Storage conditions

Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration. Store
the breast pump and its accessories in a safe, clean and dry place.
If the device has been stored in a hot or cold environment, place it in an environment with a
temperature of 20 °C (68 °F) for 30 minutes to let it reach a temperature within the usage conditions
(5 °C to 40 °C / 41 °F to 104 °F) before you use it.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

Technical information

Vacuum level
Cycle speed
Motor unit rated input
Mains adapter rated input External mains adapter 100-240 V a.c. / 50/60 Hz
Adapter type number
Mains adapter rated
output
Operating conditions
Storage and
transportation conditions
Operating pressure
Net weight
External dimensions
Device classification
Materials
Service life
Mode of operation
Single breast pump
Stimulation: -60 to -200 mbar (-45 to -150 mmHg)
Expression: -60 to -360 mbar (-45 to -270 mmHg)
Adjustable in steps of 20 mbar
Intermittent vacuum
53-120 cycles/min.
5 V d.c. / 1.1 A
S009AHz050yyyy The letters "yyyy" represent the output current from
0100 (1000 mA) to 0180 (1800 mA), increments in steps of 100 mA. The
letter "z" denotes type of plug, it can be: U, V, B, S, C, A, D, K, T, I, E, F.
5 V d.c. / 1.1 A
Temperature 5 °C to 40 °C (41 °F to 104 °F)
Relative humidity 15 to 90 % (non-condensing)
Temperature -25 °C to 70 °C (-13 °F to 158 °F)
Relative humidity up to 90 % (non-condensing)
700 - 1060 hPa (<3000 m altitude)
230 g
Motor unit: 145 mm x 95 mm x 45 mm (LxWxH)
IEC 60335-1: System: Class II; motor unit: Class III Construction
ABS, Silicone (motor unit)
Polypropylene, Silicone (other parts)
500 hours
Continuous operation
Double breast pump
5 V d.c. / 1.8 A
5 V d.c. / 1.8 A
310 g