VOLTOMAT HEATING FG-117320.2 Mode D'emploi page 71

When the heater is used not in a wall-mounted way, the feet must be fitted onto the unit.
1. Place the two feet at the bottom of the appliance.
2. Match the bulge and groove at each side to fit the two feet.
3. Tighten the two screws provided to fix the two feet at the bottom of the appliance.
OPERATING INSTRUCTIONS
The rotary knob and the marking on the casing show the setting of the thermostat.
To set the required room temperature: turn the knob to the right fully and wait until the required temperature
has been reached. Turn the knob slowly back again until the indicator light goes off. Now the position of the
knob corresponds to the required temperature.
TAKING CARE OF YOUR FROST PROTECTOR
Before cleaning the appliance disconnect the plug from the power supply and let it cool down completely.
Clean the casing occasionally with a damp cloth. Do not use any strong cleaning materials and do not allow
water to penetrate the appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 450-520W
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
- 70 -