Troubleshooting - Klarstein TRON AMBIENCE Mode D'emploi

EN
22

TROUBLESHOOTING

Fault
Light on, but motor does
not work.
Light does not work, motor
does not work.
Oil leakage.
Shake of the body.
Insufficient suction.
Possible Cause
The leaf blocked.
The capacitor damaged.
The motor jammed
bearing damaged.
The internal with of motor
off or a bad smell from the
motor.
Light damaged.
Power cord looses.
One way valve and the
air ventilation entrance are
not tightly sealed.
Leakage from the
connection ofU-shaped
section and cover.
The leaf damaged and
causes shaking.
The motor is not tightly
hanged.
The body is not tightly
hanged.
The distance between the
body and the gas top too
long.
Too much ventilation from
open doors or windows.
Solution
Get rid of the blocking.
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per
the electric diagram.
Take down the one way
valve and seal with glue.
Take U-shaped section
down and seal with soap
or paint.
Replace the leaf.
Lock the motor tightly.
Fixed the body tightly.
Readjust the distance.
Choose a new place and
resemble the machine.