MAINTENANCE
Use only a good grade hydraulic oil (e.g. Mobil
TDE 13M or equivalent).
TROUBLE SHOOTING
Symptom
Jack will not lift
• Release valve not tightly
load
• Overload condition
Jack bleeds off
• Release valve not tightly
after lift
• Overload condition
• Hydraulic unit malfunction
Jack will not lower
• Linkages binding
after unloading
Poor lift
• Fluid level low
performance
• Air trapped in system
Will not lift to full
• Fluid level low
extension
Any questions
For any questions please contact the Michelin Consumer Enquiries Helpline :
Tel : +33 (0)4 76 32 69 37
Email : michelin@impex.fr
EN
Possible Causes
closed
closed
STORAGE
When not in use, store the jack with saddle fully
lowered.
Corrective Action
• Ensure release valve is tightly closed
• Remedy overload condition
• Ensure release valve is tightly closed
• Remedy overload condition
• Contact Customer Support
• Clean and lubricate moving parts
• Ensure proper fluid level to be
checked by specialist
• ensure proper fluid level
9