Pixel Compensation [Pix Off] - Panasonic WV-CLR930 Mode D'emploi

Caméra de surveillance couleur
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Note:
• Holding down the right and left buttons for more than 2 seconds simultaneously restores
the settings of "CHROMA GAIN", "AP GAIN" and "PEDESTAL" to the default settings.

Pixel compensation [PIX OFF]

Flaws in the displayed camera image are corrected, which is called pixel compensation. Up to
16 points can be corrected. Follow the procedure below to perform pixel compensation.
"SPECIAL SETUP" screen
**SPECIAL SETUP**
CHROMA GAIN
···I···128
AP GAIN
···I···128
PEDESTAL
···I···128
O
PIX OFF
CAMERA RESET →PUSH SW
SER.NO. XXXXXXXX
RET TOP END
Step 1
Move the cursor to "PIX OFF" and press the setting button.
→ The "PIX OFF" screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the
setting button.
→ The pixel compensation positioning screen appears.
Step 3
Use the up, down, right, and left buttons to move the crosshair cursor to the center of the flaw
to be corrected and press the setting button.
→ The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screen
appears again. "
ed. The coordinate is expressed in figures.
"PIX OFF" screen
**PIX OFF**
1
5
9
+
13
000 000
RET TOP END
" is attached at the right side of the number when registration is complet-
*
2
3
4
6
7
8
10
11
12
14
15
16
Pixel compensation
positioning screen
51

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wv-clr934

Table des Matières