Handling The Brew Group; Reinserting The Brew Group; Cleaning And Maintenance; Cleaning Table - Saeco Xelsis SM7786 Mode D'emploi

English
12
- Brightness: to adjust the display contrast
- Water tank light: to adjust the light in the water tank
- Language: to select a different language
- Sound feedback: to activate/deactivate the sound feedback of the display
- Spout light: to adjust the light in the coffee and milk dispensing spout (specific types only)
- Factory settings: to reset to the factory settings

Handling the brew group

Go to www.saeco.com/care for detailed video instructions on how to remove, insert and clean the
brew group.
Removing the brew group from the machine
1 Switch off the machine by pressing the main switch on the back of the machine.
2 Open the service door (Fig. 17).
3 Remove the coffee residues drawer (Fig. 18).
4 Press the PUSH button (Fig. 19) and pull at the grip of the brew group to remove it from the
machine (Fig. 20).

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct position.
1 Check if the arrow on the yellow cylinder on the side of the brew group is aligned with the black
arrow and N (Fig. 21).
-
If they are not aligned, push down the lever until it is in contact with the base of the brew group
(Fig. 22).
2 Make sure that the yellow locking hook on the other side of the brew group is in the correct
position.
-
To position the hook correctly, push it upwards until it is in uppermost position (Fig. 23).
3 Slide the brew group back into the machine along the guiding rails on the sides until it locks into
position with a click. Do not press the PUSH button.
4 Place back the coffee residues drawer and close the service door.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting
coffee for a long time, a steady coffee flow and a perfect milk froth.
Consult the table on when and how to clean all detachable parts of the machine. You can find more
detailed information and video instructions on www.saeco.com/care.

Cleaning table

Part description When to clean
Brew group Weekly
How to clean
Remove the brew group and rinse it under the
tap and let it air-dry.