General Usage - Bell & Ross BR 03-92 Mode D'emploi

BR 03-92
BR-CAL.302
Movement: mechanical with automatic winding. Calibre BR-CAL.302. Power
reserve approximately 40 hours. hours, minutes and seconds. Date
Functions:
with quickset. Time-setting with hacking function.

GENERAL USAGE

Starting the watch. When the watch has stopped (crown in position 0): wind
the movement by rotating the crown clockwise. After approximately 40 rota-
4
tions, the watch is fully wound (the winding mechanism does not have a stop
to prevent overwinding). The power reserve is approximately 40 hours when
fully wound. When the watch is worn , the automatic mechanism will wind the
movement.
Setting the time. Pull the crown out to position 2. The seconds hand will stop,
enabling you to set the time to the nearest second. Set the time by rotating
the crown in the required direction.
Quickset* (crown in position 1): pull the crown out to posi-
Setting the date.
tion 1 and set the date by rotating the crown anticlockwise. Slow setting
Case: 42 mm in diameter. (crown in position 2): to ensure the date changes at midnight rather than
noon, it is recommended you set the date by adjusting the hands of the watch.
Pull the crown out to position 2 and turn the hands until the date changes.
Then set the precise time.
A. Minute hand
B. Hour hand
C. Second hand
D. Case attachment screws
E. Date
F. Strap attachment
G. Crown
(NEVER UNSCREW)
A
B
C
D
(x4)
0. Wind the movement manually (rotate clockwise)
1. Set the date (rotate anticlockwise)
2. Set the time (rotate in either direction)
0 1 2
G
F
E