General Usage; Important - Bell & Ross BR03-92 DIVER Notice Technique

EN
BR 03-92 DIVER
Calibre BR-CAL.302. : mechanical with automatic winding. Power reserve approximately 40 hours.
Movement
: hours, minutes and seconds. Date with quickset. Time-setting with hacking function. : 42 mm in
Functions Case
diameter. Unidirectionnal rotating notched bezel.

GENERAL USAGE

To unscrew the crown in position 0, rotate it anticlockwise.
. When the watch has stopped , unscrew the crown out to position 1 and wind the movement by
Starting the watch
rotating the crown clockwise. After approximately 40 rotations, the watch is fully wound (the winding mechanism
does not have a stop to prevent overwinding). The power reserve is approximately 40 hours when fully wound.
When the watch is worn , the automatic mechanism will wind the movement.
. Quickset* (crown in position 2): pull the crown out to position 2 and set the date by rotating
Setting the date
the crown anticlockwise. Slow setting (crown in position 3): to ensure the date changes at midnight rather than
noon, it is recommended you set the date by adjusting the hands of the watch. Pull the crown out to position 3
and turn the hands until the date changes. Then set the precise time.
. Pull the crown out to position 3. The seconds hand will stop, enabling you to set the time to the
Setting the time
nearest second. Set the time by rotating the crown in the required direction.

IMPORTANT

*
. As with all mechanical watches with a date function, quickset date setting (crown in
Quickset date setting
position 2) MUST NOT UNDER ANY CIRCUMSTANCES be carried out between the times of 9 P .M. (21:00) and
3 A.M. (03:00).
. Magnetic fields can adversely affect the accuracy of your watch. Also, we would recommend
Magnetic fields
that you avoid placing your watch near electronic devices that may generate large magnetic fields (radio, smart-
phone, television, computer, tablet, loudspeakers etc.).
. Once the watch is set, to ensure perfect water resistance, push the crown back and screw
Water resistance
back to position 0. Never operate the crown underwater.
4