Technical Notes; General Description; General Use; Water Resistance - Bell & Ross BR-S Quartz Notice Technique

BR-S Quartz
Te c h n i c a l N o t e s
Smaller, Sleeker, Smarter
The BR-S watch is a classic interpretation of the professional BR 01 instrument.
Smaller (38 x 39 mm), flatter (7 mm) and with a precision movement, the BR-S
is synonymous with performance and elegance.

GENERAl dESCRIpTIoN

Quartz with analogue display, ETA 980.163. Hours, minutes and
movement
small second. 15 rubies. Silver oxide, low-drain battery 1.55 V, theoretical
two-year running time. Functions
Time setting with second stop. Ceramic (black or white) and steel or 18 ct
pink gold case . Width 39 mm x depth 38 mm. Ceramic, steel or pink gold
bezel , with or without one row of inset diamonds (black or white). Black
or white dial . Painted, appliqué or inset diamond index.
with a highly luminescent pigment to make them easier to read at night.
Anti-reflective coated sapphire
rubber or ceramic strap .

GENERAl USE

Position 1: running position. Position 2: time setting.
starts running as soon as the battery is installed.
the crown to position 2. The second hand is then stopped and the time
may be set to the exact second. Set the time by turning the crown in the
desired direction.
A
B
C
D
(x4)
A. Minutes hand
B. Hours hand
C. Seconds hand
D. Case trim screws
(never loosen)
e. Crown
F. Case fixing screws
(never loosen)
1. Pull the crown
2. Set the time (clockwise or anti-clockwise)
: hours, minutes and seconds indication.
Hands
crystal . Water-resistance : 50 m. Leather,
Activation
setting the time
1 2
WATER-RESISTANCE
Once the time has been set, push the crown back to position 1 to ensure
total water-resistance. The crown should never be manipulated under
water.
MAINTENANCE
After each immersion in seawater, it is advised you carefully rinse your
coated watch and its strap with fresh water. It is also advised to have the water
resistance of your watch serviced every two years. In order to guarantee
a service in accordance with the brand's requirements, the Bell & Ross
repair centre must carry out any intervention on your watch or a regis-
tered Bell & Ross watchmaker. When a repair is carried out during the
guarantee period, you must present the Bell & Ross guarantee card, duly
: the watch dated and signed by the retailer during the watch purchase.
: pull
F
E
The Bell & ross international guarantee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making
industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the
Bell & Ross approved retailer on the international guarantee certificate subject to applicable laws and/or legal
guarantees. This guarantee is total (parts and labor). It excludes however :
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing,
brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an
approved after-sales service center.
. The consequences of normal use and wear of the watch. It also excludes leather straps and batteries, given
the specific nature of these parts.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by appro-
ved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross international guarantee certificate, duly
completed, dated and signed by an approved retailer.
(x4)