Rane Twelve Guide D'utilisation page 8

Rear Panel
2
1
1. Power Input: Use a standard IEC power cable (included) to connect Twelve to a power
outlet. While the power is switched off, plug the cable into Twelve first, then plug the cable
into a power outlet.
2. Power Switch: Use this switch to power Twelve on and off.
3. Motor Torque: Flip this switch to adjust the torque of the platter. At the high setting, the
platter will have the heavier, stronger feel of "modern" turntables. At the low setting, it is
lighter and more graceful—the feel of a "classic" turntable.
4. USB Port: Use a standard USB cable (included) to connect this USB port to an available
USB port on the Rane Seventy-Two (sold separately) or your computer.
8
3 4