Service Department - Master Pumps MPC200 Traduction Des Instructions D'origine

MPS1101I
Type
Mains voltage V
Mains frequency Hz
Power input W
-1
No load speed min
Max. pump capacity l/min
Max. lift m
Max. submerging depth m
Max. grain size mm
Max. water temperature ° C
Type of protection / Insulation class
Gewicht kg
MPS1100-2SI
Type
Mains voltage V
Mains frequency Hz
Power input W
-1
No load speed min
Max. pump capacity l/min
Max. lift m
Max. submerging depth m
Max. grain size mm
Max. water temperature ° C
Type of protection / Insulation class
Gewicht kg
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : < 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
INOX
Wasser: verschmutzt
230
50
1100
2800
316.6
8
5
35
35
IPX8
6.9
INOX
Wasser: verschmutzt
230
50
1100
2800
240
10
7
35
35
IPX8
5.7
ATTENTION !
must be worn.
when the tool is switched off and when it is
running idle in addition to the trigger time).

SERVICE DEPARTMENT

_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
AFTER-SALES SERVICE AND APPLICATION
SERVICE
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
MASTER PUMPS application service team will
gladly answer questions concerning our products
and their accessories : sav@eco-repa.com
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
Made in China
replacement after
dispose of it in an
2016
17