Comet KF STEEL Série Notice Technique page 30

PROBLEM
The cleaner will not
start up again and the
warning light (29) is lit .
The cleaner will not
start up again and the
warning light (31) is lit.
In Steam mode, the
burner does not start or
stops working and the
warning light (32) is lit.
Lamp (33) flashing.
30
CAUSE
The cleaner has been inactive
for
more than 15 minutes and has
entered Timed Shutdown mode.
Leaks have been detected in the
delivery circuit causing the
cleaner to restart several times:
the relative safety device has
tripped causing the cleaner to
stop working.
Pressure above 32 bar/464 psi. Follow the instructions in
M a l f u n c t i o n i n s o m e
temperature control device
SOLUTION
Follow the instructions in
CLEANER/INTERRUPTING THE OPERATION –
TIMED SHUTDOWN"
Turn the master switch (1) to "0", wait for
a few seconds and start up the cleaner
again.
SHOULD IT TRIP AGAIN, DO NOT USE
THE CLEANER AND CONTACT A QUALIFIED
TECHNICIAN.
CLEANER IN STEAM MODE"
Use the machine only in Cold Water.
CONTACT A QUALIFIED TECHNICIAN.
"STOPPING THE
"OPERATING THE
.