Forch Powerwash Bio Mode D'emploi page 59

5 TANK
Liquid filling level:
■
■
■
In the immersion operation the min. filling level can be triggered above 45 litres in the
degreasing bath (the immersion basin holds about 11 litres).
Drainage:
■
Lift the parts washer (place onto a palett, a fork lift etc.).
■
Loosen the part for fixation of the drain hose at the back part of the appliance.
■ Provide the empty containers for the liquid.
■
Open the hose cap and pour the used liquid into the containers.
6 PARAMETER DISPLAY AND PARAMETER MODIFICATION
6.1 PARAMETER DISPLAY
DISPLAY
To call the parameter display press the two buttons BOOST and ECO
simultaneously. The degreasing bath temperature and the time of the ECO-mode
are displayed.
LANGUAGES
For language display press the ON/OFF-button (same button as HEATING).
INCIDENTS
By pressing the ON/OFF-button the INCIDENTS will be displayed.
For displaying the stored incidents press the
If no incident had been stored then "No incident" will be displayed.
Otherwise the different incident messages will be displayed which can be scrolled
by pressing the
TERMINATION
2 sec Press the ON/OFF-button for 2 seconds to exit the display mode.
Without pressing this button the unit will return to normal operation mode after
5 seconds.
80 litres: max. filling level
60 litres: filling level 60 litres
45 litres: min. filling level
button.
button