Using The Appliance - Forch Powerwash Bio Mode D'emploi

4 START
4.1 SWITCHING ON
If the parts washer is filled with Organic Cleaner R590 according to the instructions the heating turns
on automatically. Upon reaching the operating temperature the heating is switched off.

4.2 USING THE APPLIANCE

4.3 BOOST-MODE (short-term temperature rise by 5°C)
By increasing the temperature also parts with persistent stains can be cleaned more easily.
BOOST-display flashes.
HEATING-display flashes.
2h00
Green indicator light flashes.
Press the button for pump control and then clean the parts with the
brush attached to the brush holder.
25 mm
T°
Green indicator light flashes slowly.
For a better footing of the brush holder a clip to
clamp the hose is attached to the right side wall of
the basin bottom.
Attention! The clip is only to be used for attaching
the hose.
T° = 43°
Temperature reached ->
Heating is switched off.
BOOST-display flashes.
HEATING-display flashes.
T° = OK
T° = 38°
Green indicator
light flashes slowly.