Technical Data - Forch Powerwash Bio Mode D'emploi

1.4 MAINTENANCE / TRANSPORT / MOVING THE DEVICE
■ to move or transport the device, please pour the cleaning liquid into the empty original containers
(see instructions paragraph 5). (Weight empty = 22kg).
■
place the parts washer vertically onto a pallet - size 600 x 800 mm (never transport the device in
a horizontal or lying position).
■
protect the parts washer by a packaging cardboard box.
■
strap the pallet and the device or wrap it with a plastic foil in order to prevent the parts washer
from tipping over.

1.5 TECHNICAL DATA

■ Voltage: 1050 W
■ Noise level < 50 dBa
■
Empty weight 22 kg
■
Material: PEHD
■ Power supply: 230V. The socket must be protected by a 30mA circuit breaker.
■
Power consumption within 24h with an average temperature of 38° degrees Celsius and the tank
filled with 50 litres:
At an ambient temperature of 18°C and with 50 litres of liquid the power consumption is approx.
210W/h.
At an ambient temperature of 23°C and with 50 litres of liquid the power consumption is approx.
160W/h.
When you have the device working in ECO-mode during 12 h per day, the power consumption is
reduced by approx. 25%.
■
Rated operating temperature: 38°C
■ Overall dimensions: 810 x 610mm - H 1010mm
■
Usable dimensions of the cleaning basin: 690 x 420 x 180 mm ?
■
Filtration: Filter basket made of stainless steel 700µ / filter sock 20µ
■ Capacity of the cleaning basin: 11 litres. Immersion depth 14 cm
■
Activation of the minimum filling level: 45 litres in the tank
■
Activation of the minimum filling level when immersing: 56,5 litres (45 litres in the tank + 11 litres in
the cleaning basin + 0,5 litres circulated liquid).
■
Flow rate of the brush holder with attached brush: 1,7 litres/min
■
Flow rate of the brush holder without brush: 6 litres/min (immersion operation).