32 Installation Instructions; Before You Begin; Unpacking The Cooktop - Signature Kitchen Suite SKSIT3601G Guide D'utilisation

32 INSTALLATION INSTRUCTIONS

INSTALLATION
INSTRUCTIONS
Installation and service must be performed by
qualified personnel.
IMPORTANT:
Save these instructions for local electrical inspector's
use. Read and save these instructions for future
reference.

Before You Begin

Read these instructions completely and carefully.
Notes to Installer:
• Read through the entire installation instructions
before installing the cooktop.
• Remove all packing material before connecting the
electrical supply to the cooktop.
• Observe all governing codes and ordinances.
• Only certain cooktop models may be installed over
certain built-in electric oven models.
• Be sure to leave these instructions with the
consumer.
Note to Consumer:
Keep the Owner's Manual and Installation Instructions
for future reference.
NOTE
• This appliance must be properly grounded.
• Damage caused by failure to follow these
instructions is not covered by the cooktop
warranty.
CAUTION
If storage is located under the cooktop, do not
use it to store flammable or heat-sensitive items
such as detergents, aerosols, cleaners, water,
food, or plastics.
Tools Needed
Pencil
Phillips screwdriver
Pliers
Level
Safety glasses

Unpacking the Cooktop

1
Unpack and visually inspect the cooktop for any
damage or missing components.
2
Be sure the bottle of cleaner and conditioner
packed in the literature bag is left where the user
can find it easily. It is important that the ceramic-
glass cooktop be pretreated before use. See
CARE AND CLEANING.
Model and Serial Number Location
The model and serial numbers are located on a plate
on the right rear side of the cooktop. Please record
them in this guide; you will need them for warranty
registration.
Saber Saw
Flat-blade screwdriver
Tape measure
Drill
Gloves