Signature Kitchen Suite SKSIT3601G Guide D'utilisation page 26

26 OPERATING INSTRUCTIONS
Cookware Heating Index
The container heating index can be used to determine
if a container will heat well on an induction burner.
• The heating index may vary due to conditions
such as voltage, cookware size, or cookware
temperature. Use cookware with a bottom diameter
that is suitable for the burner size.
• The heating index may vary depending on the
burner.
• The cookware heating index displayed on this
product is based on internal manufacturer
standards. Environmental conditions may cause
inaccurate or variable results. Use the results only
as a reference point.
Using the Heating Index
1
Turn off all burners.
• If more than one burner is running, this
function will not work.
2
Place the cookware on the burner you want to
use.
• Place cookware in the center of the burner.
3
Set the output level to 9.
4
Long press (more than 3 seconds) on the power
level area to display the cookware heating index.
Long press (more than
3 seconds) on level 9.
The cookware heating
index is displayed.
Index 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
No
Heating
heating
• The higher the index, the better the cookware heats
up (in the range of 0 to 100%, in 10% increments).
• If the index is low, check the material, size and
shape of the cookware base.
− Even if the cookware has an IH mark, if the index
is low it may not heat properly on this appliance.
Low High