ACCESSORIES
Cyclone dust box
60 grit velcro sanding paper
120 grit velcro sanding paper
180 grit velcro sanding paper
Dust extraction adapter
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
8
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Random orbit sander
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
1
instruction book carefully.
10
INTENDED USE:
The machine is intended for dry sanding of wood,
10
plastic, metal and filler material as well as painted
surfaces.
10
Machines with electronic control are also suitable for
polishing.
1
ASSEMBLY AND OPERATION
ASSEMBLY
Fitting the Sanding Paper
Attaching the Cyclone Dust Box
CAUTION: To prevent the
possibility of sanding dust or
foreign body being thrown into your
face or eyes, never attempt to use
your sander without the dust box
properly installed.
Emptying the Cyclone Dust Box
For more efficient operation, empty
dusts box every 5-10mins.
Using the dust extraction adapter
OPERATION
On/Off Switch
Variable speed control
With the variable speed control, the
required speed can be selected (also
while running).
The required speed is dependent on
the material and is to be determined
by a practical trial.
After longer periods of working at
low speed, allow the machine to
cool down by running it for approx.
3 minutes at maximum speed with
no load.
Orbital sanding
Selecting the right grade of
sandpaper
NOTE: The sandpaper is Different
grades of sanding sheet . Available
grades range from coarse to fine. This
machine can only fit special sanding
paper, which can be purchased from
the store where the sander was
purchased, or www.worx.com.
Changing the Outer/Inner Pad
Action
Figure
See Fig.
A1, A2
See Fig. B
See Fig.
C1, C2
See Fig. D
See Fig. E
See Fig. F
See Fig G
See Fig H1,
H2, H3, H4
EN