Preliminary Operations; Loading Pellets; Electric Power Supply; Initial Settings - CASATELLI FILIPPO 8E Manuel

10

PRELIMINARY OPERATIONS

10.1 LOADING PELLETS

The first operation to perform before switching the
stove on is to fill the fuel (pellet) tank using the
relevant scoop.
Do not empty the bag directly into the tank to avoid
introducing sawdust or other foreign elements that
could prevent the stove from working properly and
avoid scattering pellets outside the tank.
Be sure to close the lid of the tank well after loading
the pellets. A safety switch (only for specific models)
checks that the lid has been closed correctly and
activates an alarm if the lid has been left open for
more than a minute while the stove is operating.

10.2 ELECTRIC POWER SUPPLY

Connect the stove to the mains, press the ignition
switch on the back of the stove, placing it on "I"
(Fig. 10.2). If the connection is correct, the stove
emits a series of intermittent acoustic signals and
the display lights up.
If the stove is not used for long periods, we
recommend turning the switch on the back of the
machine to the OFF (O) position.
Do not touch the control panel when the stove
is powered on.

10.3 INITIAL SETTINGS

Before using the stove, it is necessary to set the
current date and time.

10.3.1 Setting time and date

To change the date:
a) Use the keys on the set-up menu
b) Select the password "7" with the
c) Scroll with the
d) The hour value will flash; change the value with the
e) The minutes value will flash; change the value with the
f) The value of the day will flash; change the value with the
g) The value of the month will flash; change the value with the
h) The value of the year will flash; change the value with the
i) The value of the current day of the week will flash (Monday =
keys;
j) Press the key to confirm the data entered.
and press the
key and confirm with the
[3]
key, select the submenu
004778320 - 16/07/2020
key
key;
and confirm with the key;
keys and press the
keys and press the
keys and press the
keys and press the
keys and press the
1
... Sunday =
Fig. 10.2
key;
key;
key;
key;
key;
7
); change the value with the
43