Preliminary Operations; Loading Pellets; Electric Power Supply; Initial Settings - CASATELLI FILIPPO 12 E1C Généralités - Avertissements - Installation - Entretien

10

PRELIMINARY OPERATIONS

10.1 LOADING PELLETS

relevant scoop.
Do not empty the bag directly into the tank to avoid
introducing sawdust or other foreign elements that
could prevent the stove from working properly and
avoid scattering pellets outside the tank.
Be sure to close the lid of the tank well after loading
checks that the lid has been closed correctly and
activates an alarm if the lid has been left open for
more than a minute while the stove is operating.

10.2 ELECTRIC POWER SUPPLY

Connect the stove to the mains, press the ignition
switch on the back of the stove, placing it on "I"
(Fig. 10.2). If the connection is correct, the stove
emits a series of intermittent acoustic signals and
the display lights up.
If the stove is not used for long periods, we
recommend turning the switch on the back of the
machine to the OFF (O) position.

10.3 INITIAL SETTINGS

Before using the stove, it is necessary to set the
current date and time.

10.3.1 Setting time and date

To change the date:
a) Use the
b) Select the password "7" with the
c) Scroll with the
d)
e)
f)
g)
h)
i)
keys;
j) Press the
keys on the set-up menu
key, select the submenu
004778350 - 16/07/2020
and press the key
key;
[3]
keys and press the
keys and press the
keys and press the
keys and press the
keys and press the
1
... Sunday =
Fig. 10.2
key;
key;
key;
key;
key;
key;
7
); change the value with the
51