Navman B2 Série Mode D'emploi page 9

Ending a call
To end a call, press
When using call-waiting, press
Redialling the last number you called
To redial the number you last called, press and hold
Adjusting the volume
The B2 will default to the level of volume used when it was last paired with the same phone or PDA.
To adjust the volume during a call, push the Control switch right to increase volume or left to decrease
volume. You can also adjust volume using the volume control on your phone or PDA.
To adjust volume at other times, use the Voice Menu (see "Voice Menu" on page 10).
Changing the call to your phone or PDA
To change a call from the B2 to your phone or PDA, press
You can then change the call back to the B2 by pressing
Sending tone sounds for voice mail and other services
To use voice mail and other phone-based services, you can use the B2 to send tone sounds:
1. During a call, press the Control switch.
The B2 will say "0".
2. Push the Control switch left or right to navigate through the numbers and symbols.
3. To send a number or symbol, push the Control switch.
.
to end the current call.
for two seconds.
.
again.
9
B2 User Manual | Basic functions