Tecno-gaz PURA plus 249S2 Mode D'emploi page 39

Hydraulic specifications:
Flow rate with supply pressure of 3.4 bar 12l/h (T= 20° and C=560 μS)
Maximum and
pressure
Conductivity value of the water supplied
by PURA PLUS™
Maximum installation distance between
PURA PLUS™ and the autoclave
Salts neutralized by the resins
The graph refers to a supply of water with conductivity of 560 S/cm
The hardness of the incoming water determines the life of the cartridge and
therefore the number of litres delivered.
minimum plumbing
Production at 20 °C and 560 µS
Pressare (bar)
(2 to 7) bar
< 15 µS
2 m
Type organic and inorganic
9
ENGLISH