Technical Informations; First Use; Assembling The Appliance - ARDES AR7400 Mode D'emploi

1 - Machine body.
2 - Gasket.
3 - Square bar.
4 - Spring.
5 - Socket.
6 - Worm.
7 - Filter.
8 - Slide.
9 - Funnel.
Technical date : see the label on the motor support.
Performance : about 150kg/h raw ripe tomatoes.

FIRST USE

Before using the appliance for the first time, wash the parts in contact with food as specified in
section MAINTENANCE.

ASSEMBLING THE APPLIANCE

Before carrying out any assembly work make sure the machine is turned
off and unplugged.
Assembling the joint.
Insert the spring (4) into the lengthy part of the square bar (3). Engage the square bar with spring into socket
(5), letting part of the spring enter (4) the socket. Place the gasket (2) on the opposite shorter part of the
square bar, as shown in picture.
Assembling the tomato squeezer.
Insert the complete assembled joint by the socket (5) end into the worm. Insert the worm (6) together with the
assembled joint into the machine body (1), leaving the square bar coming out from the back.
Insert the filter (7) on the worm (6) and screw in anticlockwise.
It is advisable to slightly lubricate its parts (assembled joint and worm) with cooking oil.
Insert the machine body (1) into the motor body (9), inserting the fins (14) in their appropriate slots, then
swing the unit anticlockwise till it stops in a position vertically alligned to the motor, making the lock/unlock
lever (18) fasten in its base.
Hook the slide (8) onto the filter (7). Insert the funnel (9) into the feed.
Warning: before to remove the machine body from the motor body, switch off the appliance and unplug the
power plug from the wall outlet.
Push gently the lock/unlock lever upwards and rotate the machine body clockwise.
INSTRUCTIONS FOR USE.
It is advisable to blend ripe sauce tomatoes rather than salad tomatoes.
It is advisable to cook the tomatoes in advance or at least scald them and
cut them in pieces. You can also use raw tomatoes, but the operation will
need a longer time. If the peelings come off during cooking, remove them
and do not squeeze them.
After washing the appliance parts place the correctly assembled appliance on a stable, clean and dry
surface, making sure that there is enough room to work comfortably.
Remove the slide (8) and unfasten the filter (7), lubricate the worm (6) with a little olive oil and assemble the
filter (7) again, fastening it to the machine body (1). Assemble the slide (8) again.
Position the two collection containers (not included). One is to be placed
under the slide (8) to collect the pulp, the other is to be placed in front of
the filter (7) to collect seeds and peelings.
Pour the cooked or scalded tomatoes in pieces through the funnel (9) with motor turned off.

Technical informations

10 - Buffer.
11 - Motor body.
12 - Marks.
13 - Body slots.
14 - Fins.
15 - Motor slots.
16 - Switch.
17 - Reducer ring.
18 - Lock/unlock lever.
Instructions for use
GB
GB
7