Table des Matières
Publicité
Cleaning and care
1. Unplug the appliance. Wash
GB
all parts except for the blender
base in warm soapy water.
The attachments should only be
washed by hand. Let all parts dry
thoroughly.
Caution! The blades and inserts
are very sharp!
Troubleshooting
Problems
The appliance does not turn on.
The motor stalls during operation.
22
2. Clean the blender base with a
damp cloth.
Caution! Never immerse the
blender base in water!
Do not use abrasive cleaners or
scouring pads when cleaning the
appliance.
Causes
The appliance is not connected to a
power source.
The bottle and blade assembly is not
installed correctly in the blender base.
The safety interlock system prevents
the machine to power on.
Ingredients are too large.
Wrong ingredients.
Solutions
Connect the appliance to a power source.
Install the bottle and according to instructions in
"Operating instructions".
Contact authorized service.
If the motor stalls, turn the blender off immediately,
unplug the appliance and let it cool for at least 10
minutes.
Cut all firm fruits and vegetables into pieces no larger
than 1.8 cm² to 2.5 cm².
The appliance intended use is production of bever-
ages. Add fruits, vegetables or similiar.
Never mix ingredients such as dough, mashed pota-
toes, meat or similar.
Publicité
Table des Matières
