Standard Installation - Tripp-Lite B119-4X1-MV Manuel Du Propriétaire

Standard Installation

HD Camera
DVD
PC
Camera
1. Make sure all devices being connected are turned off.
2. Connect the first HDMI source to the port labeled "HDMI 1".
Note: When connecting the source to the switch, make sure the HDMI cable does
not exceed 16 ft. (5 m).
3. Repeat Step 2 to connect additional HDMI sources to the remaining
ports.
4. Connect the HDMI display to the port labeled "Output".
Note: When connecting the switch to the display, ensure the HDMI cable does not
exceed 16 ft. (5 m).
5. Connect the external power supply to the switch and plug it into a
Tripp Lite Surge Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS). When the switch is receiving power,
the red Power LED and blue Source LED will illuminate.
Note: Source LEDs will not illuminate until the sources are receiving power.
6. Turn on the power to the connected devices. The video image should
display on the connected monitor/TV.
18-03-032-933813.indb 3
All manuals and user guides at all-guides.com
3
HDMI Display
HDMI Cable
4/19/2018 10:59:10 AM