Stoelting VB 35 Manuel D'utilisation Et Entretien page 39

Carry out these operations only with the socket's main Breaker on POSITION "0".
STEP 1
• Removing the cover
–
the cover (2).
• Removing the retaining paddle
–
– Take out the safety stop (5) and remove the movable part (6)
of the retaining paddle.
–
non-metallic pointed tool, taking care not to damage the knob
seat.
RESIDUAL HAZARD: Mixer's blades and scrapers
are sharp along bottom and external side edges. It
is recommended to use suitable protective gloves
and to handle the mixer only by holding the central
hub and not the blades.
• Removing the mixer
–
and pull the mixer (9) out vertically.
–
non-metallic pointed tool, taking care not to damage the knob
seat.
• Removing the mixer scrapers
– Remove the side scrapers (11) using the tool supplied (12).
the tool down until the side scraper can be removed from its
seat.
– Pull the mixer's lower scraper (13) from its seat.
• Removing the extraction door
–
the extraction door (15), using a provided allen key (16),
unscrew the tightening screw (17) and remove the lever
the conic springdriver (28) and small spring (29).
Chapters 6 and 7
1
3
5
3
8
9
11
12
12
18
26
17
27
15
14
28
29
14
1
2
5
6
7
3
8
10
13
18
16
39