Stoelting VB 35 Manuel D'utilisation Et Entretien page 34

- At the end of processing, that is to say, when the product cool-
ing temperature has been reached, the operator is alerted by a
buzzer. Once the cycle has ended the cooling system switches
ues to prevent the formation of ice on the sides of the cylinder.
-
(storage) in the cylinder with a factory set temperature delta of
2°C (35,6 °F). When the temperature of the product increases
inside the cylinder, the cooling system starts automatically to re-
(F) and "TEMPERATURE-BASED CYCLE" button (E) remain lit
to indicate that the cycle is still active.
ONCE THE CYCLE HAS ENDED WE RECOMMEND EXTRACTING THE PRODUCT TO ENSURE THAT
ITS CONSISTENCY IS NOT CHANGED BY TOO MUCH MIXING.
- Position a suitable container on the machine basin support and
open the extraction door.
-
When extraction is activated the warning lamp comes on.
-
- To end the extraction and stop the machine press the "TEM-
PERATURE-BASED CYCLE" button (E). The warning light for
the temperature-based cycle will go out.
If, during the processing cycle, you want to modify the cooling temperature, this can be done by accessing the programming
section. Follow the instructions in section 5.3.1 of this manual.
- Press the + Programming/Adjustment button (B) and wait until
the digital display shows code "P1".
-
merical value indicating the cooling temperature set appears on
the display (e.g.: -7°C / 19 °F).
- Press the adjustment buttons (C) and (D) to set the new cooling
temperature for the product processed.
34
-
F
E
-
G
E
B
C
D