Maintenance And Cleaning; Led Light System - Whirlpool WVA35643 Mode D'emploi

MAINTENANCE AND CLEANING

Before any cleaning or maintenance operation,
unplug the appliance from the mains or disconnect
the electrical power supply.
Periodically clean the appliance with a cloth and a
solution of lukewarm water and neutral detergent
specifically for refrigerator interiors. Never use
detergents or abrasives. Never clean refrigerator
parts with flammable fluids. The fumes can create a
fire hazard or explosion. Clean the outside of the
appliance and the door seal with a damp cloth and
dry with a soft cloth.
Do not use steam cleaners.
Clean the condenser (back the appliance) using a
vacuum cleaner, proceeding as follows: remove the
front plinth and proceed to clean the condenser.
Important:
• The buttons and control panel display must not
be cleaned with alcohol or alcohol-derived
substances, but with a dry cloth.
• The refrigeration system pipes are located near
the defrost pan and can become hot.
Periodically clean them with a vacuum cleaner.
• To remove or insert the glass shelf, move up the
front part of the shelf to pass the stopper..

LED LIGHT SYSTEM

The light system inside the freezer compartment
uses LEDs light, allowing a better lightning as well
as very low energy consumption. If the LED light
system does not work, please contact the Service
to replace it.
26