For Users - Teddington INOA 06 Manuel D'installation & D'utilisation

c. Press for 3 seconds to lock screen and it will be dark
Screen unlock:
a. Press for 3 seconds to unlock screen and it will be lit up.
b. Only after screen is unlocked, any other buttons can be functioned.
Water inlet
temperature
Water outlet
temperature
1.Power On: Press
2.Adjust Set Temperature: When screen is unlocked, press
temperature.
3.Smart/Silence mode selection:
① Smart mode as default will be activated when heat pump is on, and screen shows
② Press to enter Silence mode, and screen shows
(Suggestion: select Smart mode for initial heating.)
for 3 seconds to light up screen, then press
Heating
Compressor
Heating capacity percentage
or
.
- 5 -

For users

Smart/Silence
mode
to power on heat pump.
to display or adjust the set
.