BD FOOTANALYSIS incl. SW & SCAN (230 V)
1.1.4 Safety information for the operator (owner)
1.1.5 Safety information for operating personnel
1.1.6 Safety information for operation
18
•
Only allow personnel that has received proper training or
instruction to operate the device. Clearly define the
responsibilities of the operating personnel for operation,
maintenance and repairs.
•
The operating company/personnel may not make any
alterations, additions or modifications to the device that could
affect safety without the consent of the WINTERSTEIGER
company.
•
The device may only be operated in a flawless technical
condition and only according to the intended use under
consideration of safety issues, potential dangers, and the
operating manual. Faults which may affect safety must be
rectified immediately.
•
The device may only be operated by properly trained
personnel.
•
The device may only be put into operation if it is fully
assembled and ready for operation.
•
The device may only be set up by properly trained personnel.
•
The device may only be operated with auxiliary devices that
have
been
WINTERSTEIGER company.
supplied
and/or
authorized
by
the