General Information; Safety Information; Basic Safety Principles; General Safety Instructions - BOOTDOC BD CMT Notice D'instructions

General information

2 General information

2.1 Safety information

2.1.1 Basic safety principles

This device is built in line with the state-of-the-art and accepted safety regulations. 
However, dangers for the user or third parties as well as damage to the device and other
objects can occur if it:
is used by untrained or unauthorized personnel

 is put to unintended use,
is not properly maintained or serviced.


2.1.2 General safety instructions

The device may only be used indoors!

 The device must only be repaired and used with original WINTERSTEIGER spare
parts/consumables.

2.1.3 Safety instructions for the operator (owner)

Only use trained or instructed personnel. Clearly assign persons responsible for

operating, setting up, maintaining and servicing!
The owner/operator of the device must not make any changes, additions or modifi-

cations to the device that could affect its safety without authorization from WINTER-
STEIGER.

2.1.4 Safety instructions for operating staff

The device may only be used if it is in good working order, used for its intended pur-

pose, taking the safety instructions and potential risks into consideration after rea-
ding the operating instructions! Faults which could affect safety shall be repaired
immediately.

2.1.5 Safety instructions for operation

The device may only be operated by trained personnel.

 Assemble the device and prepare it for operation before operating.
BD CMT -12-