General Information; Safety Instructions; Basic Safety Information; General Safety Information - BOOTDOC BD FOOTANALYSIS incl. SW & SCAN Notice D'instructions

1. General information

1.1 Safety instructions

1.1.1 Basic safety information

The device has been constructed in accordance with the latest
technological standards and acknowledged safety regulations.
Nevertheless, dangers can arise for the user or third parties or for
damage to the device and other objects if they:

1.1.2 General safety information

1.1.3 Safety information for transport

•
are operated by personnel that has not received proper
training or instructions,
•
are not used as intended,
•
are not maintained or repaired properly.
•
Before relocating the device, disconnect the power plug and
the USB cable.
•
The device may only be used indoors.
•
The device
WINTERSTEIGER
material. The use of external material occurs at the risk and
liability of the operator and invalidates the warranty for the
device.
•
Place the device on a level and firm surface.
•
Always ensure that the device is protected against vibration
and impacts during transport.
•
Report damages from transportation and/or missing parts to
the shipping company or supplier without delay.
•
Measurement and weight specifications can be found in the
technical specifications on page 6.
•
Always secure objects against tipping over or falling during
transport.
may only be
replacement
operated with
parts and expendable
original
17