Remote Battery Installation - Roadstar HIF-1999D+BT Manuel D'instructions

32. SCAN BUTTON
33. PRESET BUTTON
34. EQUALIZER BUTTON
REMOTE CONTROL
35. OPEN / CLOSE CD DOOR
36. REC: in CD/RADIO/PHONO/CASSETTE mode, press to active recor-
ding function.
37. PLAYBACK MODE BUTTON
38. PLAY/PAUSE: in CD/USB mode, press once to start playback. Press
again to enter pause mode.
39. SKIP/SEARCH BACKWARD: press once to skip to previous
track.press & hold for search backward.
40. SKIP/SEARCH FORWARD: press once to skip to next track, press &
hold for search forward.
41. STOP BUTTON
42. 10+ Track Button
43. 10- TRACK BUTTON
44. FUNCTION BUTTON to select CD/USB/DAB/FM/TAPE/PHONO.
45. DELETE BUTTON
46. PROGRAM: in CD/USB mode, press to active programming function.
47. VOLUME + BUTTON
48. VOLUME - BUTTON
49. MUTE BUTTON
50. EQUALISER BUTTON
51. PRESET BUTTON
52. INFO BUTTON

REMOTE BATTERY INSTALLATION

The infrared remote control requires 2 pcs CR-2025 (3V) Lithium Battery
size battery for operation.
English 3 4 English
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
For your own safety read the following instructions carefully before attem-
pting to connect this unit to the mains.
Press the POWER button (15) 1 second to turn ON the unit. Press and
hold the POWER button during 3 seconds to turn OFF the unit. When no
sound is produced, the unit will switch OFF automatically after 15 minutes.
MAINS (AC) OPERATION
This unit is designed to operate on AC 110
-240V 50Hz current only. Connecting it to
other power sources may damage the unit.
Caution: to prevent electric shock discon-
nect from the mains before removing
cover. No user serviceable parts inside.
Refer servicing to qualified service person-
nel. Remove the stereo carefully from the
box, retaining the packaging for future use.
Connect the plug to a mains power inlet 110 - 240V AC ~ 50 Hz.
SETTING THE DISPLAY MENU LANGUAGE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will
light up.
2. Press the MENU BUTTON (19) then turn the TUNING/ENTER KNOB
(21) until select "SYSTEM".
3. Turn the TUNING/ENTER KNOB (21) until select LANGUAGE, then
press the TUNING/ENTER KNOB (21) to confirm.
4. Turn the TUNING/ENTER KNOB (21) until selected the desired lan-
guage, then press the same TUNING/ENTER KNOB (21) to confirm.