Optimizing The Energy Consumption - Gram Compact 210 Mode D'emploi

The cabinet can be installed freestanding against a wall or Compact 210 can be built
under a worktop.
The cabinet must have sufficient ventilation and free air circulation beneath, above and
behind the cabinet. There must be a minimum clearance of 30 mm above the cabinet.

Optimizing the energy consumption

 Correct set up gives the most effective operation.
 The product should be located in a dry and adequately ventilated room.
 To ensure efficient operation, it may not be placed in direct sunlight or against heat-
emitting surfaces. The product is designed to operate in an ambient temperature
between +16
 Do not keep the door open for too long.
 Keep the condenser filter clean – to be cleaned at least every 2 weeks.
 Do not set the temperature setpoint too low.
 C and +40°C.
35