Ambient Temperature; Start Up Of The Chiller - Pfannenberg PC2500 WT CE STD Notice Originale

Table des Matières

Les langues disponibles

8. Ambient temperature

Chiller is designed to operate in the ambient temperature range indicated in the type label. When ambient temperatures areout

of that range, manufacturer must be consulted. High ambient temperatures reduce Chiller capacity. Low ambient temperatures

require special controls. Fluid heaters may be required to prevent freezing and to hold the fluid in the Chiller reservoir at a

constant temperature in order to reduce start-up delays while the fluid warms up to operating temperature.

CAUTION:

QUALIFIED PERSONNEL.!!!!!!!

NOTE: The following instruction will guide you through the start up procedure in detailed steps. For a

quick commissioning instruction please see appendix A1.

Turn main switch, to the - 0 - (off) position.

CHILLER with tank: Remove filling plug, which is located in the top side of the chiller (external),

70040-122_01-_-(PC2500_Op._Manual_IT-EN-DE-FR-ES-RU).docx

WORK ON THE ELECTRICAL AND REFRIGERANT CIRCUITS MAY ONLY BE PERFORMED BY

Picture 8 – Main switch

Picture 9 – filling point

English

Table des Matières

Table des Matières