Samsung EP-P1300 Guide De Prise En Main Rapide page 294

Using the wireless charger
3
When the mobile device, Galaxy Buds or the Watch is fully charged, remove the mobile
device, Galaxy Buds or the Watch from the wireless charger.
Precautions for mobile device, Galaxy Buds or the Watch charging
• Do not place the mobile device on the wireless charger with a credit card or radio-
frequency identification (RFID) card (such as a transportation card or a key card)
placed between the back of the mobile device and the mobile device cover.
• Do not place the mobile device, Galaxy Buds or the Watch on the wireless charger
when conductive materials, such as metal objects and magnets, are placed
between the mobile device, Galaxy Buds or the Watch and the wireless charger.
The mobile device, Galaxy Buds or the Watch may not charge properly or may
overheat, or the mobile device, Galaxy Buds, Galaxy Watch, or the cards may be
damaged.
• You may need to purchase a charger separately depending on the wireless charger
you bought.
• Place the center of mobile device or Galaxy Buds on the charging coil center, and
the Galaxy Watch on the watch charging coil. If you do not place them correctly,
the charging speed may decrease or they may not be charged properly.
• Wireless charging may not work properly if you have attached a thick case to your
mobile device. If your case is thick, remove it before placing your mobile device on
the wireless charger.
• Charging more than one device at the same time may decrease the charging
speed.
• If you connect a charger to the mobile device during wireless charging, the
wireless charging feature will be unavailable.
• When charging a Galaxy Watch, update the Galaxy Watch to the latest software. If
the latest software is not installed, the charging speed may be slow.
• If you use the wireless charger in areas with weak network signals, you may lose
network reception.
• During wireless charging, noise may occur from the wireless charger.
• To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
English (USA)
7
7