Operation; Control System Overview; Switching On/Off - Oase ProfiClear Premium TF-XL Notice D'emploi

- EN -
6

Operation

6.1

Control system overview

1 Display
• Display of the operating status
• Display of menus and values for setting the drum filter
• Pump status display
• The current water temperature [°C] is displayed by default
2 On|Off button, Quit Error
• Switching the drum filter on or off
• Reset error messages
3 LED, 2 colours
• LED is lit red: Control system switched OFF (OFF)
• LED is lit green: Control system switched ON (ON)
4 Menu button
For selecting the following menus and changing the values:
• Cleaning time "Cleaning" (CL)
• Extended cleaning time "Extra Cleaning" (EC)
• Time-dependent cleaning "Interval" (In)
• Pump status detection (E7)
5 Clean button
• Starting the manual cleaning cycle and cancelling the active cleaning cycle
• LED (6) is lit when the cleaning cycle is active
6 Blue LED
• LED is lit: Cleaning cycle active
6.2

Switching ON/OFF

Proceed as follows
Switching on:
Press for 3 s.
• LED (3) is lit green.
• The display indicates On for approx. 5 s.
Switching off:
Press for 3 s.
• LED (3) is lit red.
• The display indicates OFF.
70
Information
• The display indicates the water temperature by default.
• If there is a voltage interruption, the control system will remain
switched on.
• The control system switches off all functions.
• If there is a voltage interruption, the control system will remain
switched off.
ProfiClear_0001