Dab Radio - auna multimedia IR-140 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DAB radio mode receives DAB/DAB+ digital radio and displays information about the station, stream and track
playing.
To enter DAB mode, either press MODE until the display shows "DAB radio" or select "DAB radio" in the main menu
by the use of the SELECT control.
Scanning for stations
The first time you select DAB radio mode, or the station list is empty, the radio will automatically performs a full scan
to see what stations are available. You may also need to run a scan manually to update the list of stations for the fol-
lowing reasons:
Available stations might change from time to time.
If the reception is not good for the original scan, this may result in an empty or incomplete list of available stations.
Once the scan is completed, the radio shows a list of available stations.
Selecting stations
To listen or change a station, rotate the SELECT control followed by pressing on it to confirm. The information of the
station selected will be displayed.
To view further information, press the INFO button - upon each press, another set of information is displayed cycling
through DLS text, programme type, ensemble name/frequency, signal strength/error rate, bit rate/codec/channels
and current date.
Presets
To store a DAB preset, press and hold the MEMORY button until the display shows the "Save to Preset" screen. Select
one of the 10 presets to store the current station.
To select a preset, press the MEMORY button once, then select one of the listed preset stations. When a preset station
is playing, "Pn" (P1, P2 etc...) will appear in the lower part of the display.
Other Settings
Prune invalid
To remove stations that are listed but unavailable, press the MENU button and select "Prune invalid>[YES]"
by the use of the SELECT control.
Manual tune
To select manual tune, press the MENU button and select "Manual tune".
Rotate the SELECT control to move through the DAB channels, the display will show "5A to 13F" and their as-
sociated frequencies.
When your desired frequency appears in the display, press on the SELECT control to confirm.
DRC (Dynamic range compression)
If you are listening to music with high dynamic range in a noisy environment, you may wish to compress the audio
dynamic range. To change DRC, press the MENU button then enter into the "DRC" section, and select DRC high,
low, or off by the use of the SELECT control.
Station order
You can choose the order of the DAB station list to be either alphanumeric, ensemble or valid. To change station
order, press the MENU button then enter into the "Station order" section, and select Alphanumeric, Ensemble or
Valid by the use of the SELECT control.
FM radio mode receives analogue radio from the FM band and displays RDS information about the station if
available.
To enter FM mode, either press MODE until the display shows "FM radio" or select "FM radio" in the main menu by the
use of the SELECT control.

DAB Radio

FM Radio
22

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

100280941002809510028096

Table des Matières