Getting started
Installing your Highway
Before you can start using your Highway, you need to do the following:
1.
Position the antenna in your vehicle.
2.
Position the controller in your vehicle.
3.
Connect the antenna to the controller.
4.
Connect the controller's power and audio cables to your vehicle.
5.
Switch your Highway on for the first time.
To watch a video showing how to install your Highway, search for 'Highway 200 installation' on YouTube.
Vehicle requirements
Fitted audio system with auxiliary (3.5mm) port or FM receiver.
l
Standard 12V negative earth power supply. Your Highway is not suitable for use with a 24V power supply.
l
Getting the best DAB signal
As with FM radio, DAB signal coverage changes depending on your location. As you use the Highway in your vehicle, you may
travel through areas where DAB signal coverage is poor.
6