Connecting The Antenna To The Controller - PURE Highway 200P Mode D'emploi

Connecting the antenna to the controller

1. Place the antenna cable so that it follows a path to the controller on
your vehicle's dashboard.
Note: To prevent interference to the DAB signal, keep cables away
from display units such as LCD screens.
2. If possible, tuck the cable behind the trim down the side of your
windscreen. Alternatively, secure the cable to your windscreen and
dashboard with self-adhesive clips.
3. Insert the antenna cable into the connector on the rear of the
controller.
Note: Push the antenna cable in firmly, to ensure it's fully inserted.
11