Connecting The Controller To Your Vehicle - PURE Highway 200P Mode D'emploi

Connecting the controller to your vehicle

12
1. If required, gently pull apart the controller's power and audio cables to
separate them.
Note: To prevent interference to the DAB signal, keep cables away
from display units such as LCD screens.
2. You can connect the antenna to your vehicle's power supply with the
supplied self-fit 12V power adapter, or with the PIPA for professional
installations.
If you're using the self-fit 12V power adapter, insert the USB
l
power cable into the power adapter, then insert the power
adapter into your vehicle's power socket.
For professional installations using the PIPA, see page 14.
l