Positioning The Antenna - PURE Highway 200P Mode D'emploi

If you have a heated windscreen in your vehicle, or the windscreen contains metallic UV filters, it can cause interference for
the DAB signal. Install the antenna on a part of the windscreen that does not contain heating elements or UV filters.
For more information on where to safely and legally install your Highway in your vehicle, contact your local transport
office. To find local fitters that can install your Highway professionally, visit pure.com/store-locator.

Positioning the antenna

8
1. Choose a position for the antenna, so that it's as high as possible on
the windscreen and at least 4cm from the side of the screen.
Make sure the antenna does not obstruct the view of the driver.
2. Gently pull down the front of the roof liner in your vehicle, until there is
a small gap.
3. Push the magnetic grounding tail through the gap, with the
silver-coloured magnet facing upwards. Make sure the magnet
touches your vehicle's metal bodywork.