Troubleshooting - PURE Highway 200P Mode D'emploi

Troubleshooting

Problem
I can't hear any sound.
The controller is not
responding.
Sound is distorted when
my Highway is connected
with the Line Out cable.
24
Possible cause
Your Highway is not connected to your
vehicle.
Your vehicle's audio system is not in the
correct input source.
Your Highway is not in the correct mode. Change the mode to digital radio or auxiliary input. Read more on
The volume is too low on your vehicle
or connected mobile device.
The controller isn't connected properly
to a power supply.
The gain setting isn't correct.
Solution
Ensure the Line Out cable is firmly connected to your vehicle's audio
system, or ensure you are tuned to the correct FM frequency.
Change the input source on your vehicle's audio system to FM radio
or auxiliary input.
pages 16 and 18.
Turn up the volume on your vehicle and on the connected mobile
device.
Ensure the controller is fully connected to the 12V power adapter,
and that the adapter is fully inserted into your vehicle's power
socket. Then turn on your vehicle's ignition. If there's still a problem,
remove the 12V power adapter from the socket, then reinsert the
adapter and wait for your Highway to restart.
Set the gain setting to 'Low gain' or change to FM transmission. Read
more on page 19.