Settings; Changing Between The Line Out Cable And Fm Transmission; Setting Your Highway To Enter Standby Automatically - PURE Highway 200P Mode D'emploi

Settings

Changing between the Line Out cable and FM transmission

You can choose how your Highway is connected to your vehicle's audio system.
1. Press .
2. Press and Select to choose 'Settings' > 'Audio out'.
3. Press and Select to choose how to connect your Highway to your vehicle.
•
If you've connected your Highway with the Line Out cable, choose 'Line out'. Then press
a gain setting of 'Low gain' or 'Normal gain'. If the audio sounds distorted, choose 'Low gain'.
•
If you're connecting your Highway over FM radio, choose 'FM transmit' and then choose an FM frequency.
Ensure a radio station isn't using the frequency you choose.

Setting your Highway to enter standby automatically

By default, your Highway enters standby after 4 hours, but you can change the delay.
1. Press .
2. Press and Select to choose 'Settings' > 'Auto standby'.
3. Press and Select to choose a delay between 1 and 8 hours.
and Select to choose
19