Technical Data; Installation - IKEA LAGAN OV3 Mode D'emploi

ENGLISH
Problem
Steam and condensa-
tion settle on the food
and in the oven cavity
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.

Technical data

Dimensions (internal)
Usable volumes
Area of largest baking sheet (net surface) 1130 cm2
Bottom heating element
Top heating element
Full oven (Top + Bottom)
Oven lamp
Cooling fan
1)
Total rating
Number of functions
Energy consumption
Energy Consumption with a standard
load and bottom heating
1) Information on the electrical connection, voltage and overall power is given on the rating plate (refer to
"Product description").

Installation

Caution! Refer to the assembly
instructions for the installation.
Warning! Only a qualified and
competent person must do the installation
of the appliance. If you do not contact qualified
or competent person, the guarantee becomes
invalid if there is damage.
Possible cause
Dishes have been left in the oven
for too long
Width
Height
Depth
56 l
1000 W
800 W
1800 W
25 W
25 W
1850 W
3
0,79 kWh
0,79 kWh
Solution
Do not leave the dishes standing
in the oven for longer than 15-20
minutes after the cooking process
ends
If you operated the appliance wrongly, or
the installation was not carried out by a
registered engineer, the visit from the After
Sales Service technician or dealer may not
take place free of charge, even during the
warranty period.
• Before you built in the appliance to the kitch-
en cabinet make sure that the recess dimen-
sions are suitable.
• Make sure that there is anti-shock protection
for the installation.
• According to the regulations of force, all
parts which ensure the anti-shock protection
must be fixed in such a way that they cannot
be undone without tools.
405
335
410
10