Axis Communications P12 Série Guide D'installation page 13

AXIS P12 Series Installation Guide
AXIS P1204 Sensor Unit
!
IMPORTANT! - The casing of the AXIS P1204 sensor unit is not approved for outdoor
use - the product may only be installed in indoor environments.
The AXIS P1204 can be mounted in three different ways:
• flat on any surface
• angled on any surface, using the angled fastening bracket
• covertly behind a thin material, for example a metal sheet in a doorpost or an ATM
machine.
Flat Surface Installation
1. Fasten the camera to the wall or ceiling, using screws and plugs appropriate for the wall/ceiling
material.
2. Snap on the cover.
3. Proceed to Connect the cables, on page 19.
Page 13