Axis Communications P12 Série Guide D'installation page 11

AXIS P12 Series Installation Guide
Camera LED Indicators
LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Unlit
Power Green
Amber
Note: The Status and Network LEDs can be configured to be unlit during normal operation. To
configure, go to Setup > System Options > Ports & Devices > LED. See the online help
for more information.
Indication
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Steady for connection to a 10 MBit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
No connection between sensor unit and main unit.
Normal operation.
Flashes green/amber during firmware upgrade.
Page 11