Positioning - CONFORAMA SABA TGV60N3F/C Mode D'emploi

Positioning

GB
• This appliance is to be built into a kitchen unit or
600mm worktop,providing the following minium
distances are allowed;
• The edges of the hob must be a minimum distance of 60 mm
from a side or rear wall.
• 700 mm between the highest point of the hob surface
(including the burners) and the underside of any horizontal
surface directly above it.
• 400 mm between the hob surfaces, providing that the
underside of the horizontal surface is in line with the outer
edge of the hob. If the underside of the horizontal surface is
lower than 400 mm, then it must be at least 50 mm away from
the outer edges of the hob.
27
CLEARANCES REQUIRED WHEN
FITTING THE HOB WITH A
COOKER HOOD ABOVE