CONFORAMA SABA TGV60N3F/C Mode D'emploi page 69

• Re-assemble the Auxiliary, Semi-Rapid, Rapid and
Triple-Crown burners as follows :
1. Place the flame spreader (4) on to the burner cup (5) so that
the ignition device and the flame supervision device extend
through their respective holes in the flame spreader.The
flame spreader must click into place correctly.
2. Position the burner lid (1,2,3) onto the flame speader (4) so
that the retaining pins fit into their respective recesses.
• Replace parts in the correct order after cleaning.
– Do not mix up the top and bottom.
– The locating pins must fit exactly into the
notches.
GB
24